Arçelik Hood & Extractor Hood Types and Where to Buy Hood Filters? (Istanbul Bağcılar / Near İSTOÇ)

Arçelik Cooker Hood & Extractor Types

1) Built-in (Integrated) Hood

Hidden inside cabinets, ideal for those who prefer a more "minimalist" look in the kitchen. Typically uses a metal grease filter (cassette/mesh filter). An additional carbon filter may be required for ductless use.

2) Slide-out Extractor (Telescopic)

Practical models that are pulled forward for use. Most models feature a metal grease filter; a carbon filter is installed for ductless setups. Frequently preferred in small kitchens.

3) Wall-mounted (Ductless / Ducted) Hood

The most common type, mounted on the wall above the cooktop. In ducted use, a grease filter + duct line expels air outside. In ductless use, a carbon filter becomes crucial for odor removal.

4) Island Hood

Ceiling-mounted models for kitchens with an island countertop. Suction power and filter area are generally larger.

5) Slanted Glass / Decorative Hood

Design-oriented models. The filter type is again mostly a metal grease filter; carbon filters are supported for ductless use.

Hood Filter Types: What Does Each Do?

Metal Grease Filter (Aluminum / Wire Cassette)

• Purpose: To capture grease particles generated during cooking.
• When is it needed? It is the basic filter in almost all hoods/extractors.
• Advantage: Generally washable and reusable.
• Important tip: Compatibility of size and tab/latch structure is crucial.

Carbon (Activated Carbon) Filter

• Purpose: To help chemically trap odors and smoke.
• When is it needed? For ductless (recirculation) use.
• Note: Most carbon filters are not washable; they require regular replacement.

“How do I choose the right filter?” Quick checklist

1. Remove your old filter and measure its width x height (mm/cm).
2. Check the tab/latch placement and number on the filter.
3. If possible, note the brand-model information of the appliance.
4. If in doubt, compare it directly with a photo of the old filter.

Where to Buy a Hood Filter in Istanbul Bağcılar? (Near İSTOÇ)

You can purchase hood/extractor filters from our store, located approximately 2 km from İSTOÇ. To select the correct product by size, it will greatly facilitate your task if you bring your old filter or its measurements with you.

Related YouTube Videos

The videos below provide practical insights into topics such as cleaning metal grease filters and using carbon filters:

AlanyaYedekParca.com Most Popular Hood Filters (Product Embed with Image)

The following products are examples of the most preferred hood grease filter options, focusing on size/compatibility. Before purchasing, please check for size and tab structure compatibility.

Arçelik P180I Metal Grease Filter (20.5×47.6 cm / 475×205 mm)

Purpose of use: Helps protect the motor by capturing grease vapor.

When is it preferred? If an Arçelik compatible cassette filter with the same size and tab structure is required.

300×250 mm Cooker Hood Grease Filter (25×30 cm)

Purpose of use: Helps maintain more stable suction performance by trapping grease particles.

When is it preferred? If your current filter is compatible with 300×250 (or alternative sizes listed on the page).

440×170 mm Cooker Hood Grease Filter (A4)

Purpose of use: Helps protect the internal components of the hood by filtering grease and steam.

When is it preferred? If your filter size is 440×170 and the tab spacing is compatible.

303×256 mm Cooker Hood Grease Filter (Metal)

Purpose of use: Aims for cleaner air circulation in the kitchen by providing grease retention.

When is it preferred? If your old filter is 303×256 in size and the tab structure is the same.

250×350 mm Cooker Hood Grease Filter (25×35 cm)

Purpose of use: Aluminum cassette filter that helps trap grease vapor.

When is it preferred? If your filter size is 250×350 and the tab spacing/position is compatible.

Frequently Asked Questions

How often should a hood filter be replaced?

Metal grease filters can generally be used for a long time by washing them; carbon filters, however, need to be replaced at regular intervals depending on the intensity of use. The healthiest approach is to check for signs such as reduced suction or increased odor.

What is the most common mistake made when buying an “Arçelik hood filter”?

Only looking at the "brand" and not checking the size and tab structure. Even within the same brand, there can be different sizes. Therefore, the measurements and the locking/latch mechanism of the old filter must be compared.

How can I quickly find the right filter in Bağcılar?

The most practical method: Take a photo of the old filter + note its measurements (width×height). This way, direct matching in the store will be much faster.